Anduril 2: Aux LED Voltage Colors Reference
This page refers to features of Anduril 2.
You may be looking for the Anduril 1 manual or Check if you're running Anduril 1 or 2.
The Anduril 2 Manual mentions the Aux LED Voltage mode colors:
In voltage mode, the colors follow the same sequence, in the same order as a rainbow… with red indicating a low battery and purple indicating a full battery.
If you’re like me, you may not actually know what the colors of the rainbow are (doh!). No fret, here’s a handy reference with colors of the rainbow which represent the battery level from full down to empty:
I also took a look at the Anduril 2 source code to make sure I knew what each color means in terms of volts. These were confirmed for me with a comment in r/flashlight by u/enter_user_name:
| Voltage | Color |
|---|---|
| > 4.4V | white-ish (red+blue+green) |
| 4.1-4.4V | purple (blue+red) |
| 3.9-4.1V | blue |
| 3.7-3.9V | cyan (green+blue) |
| 3.5-3.7V | green |
| 3.3-3.5V | yellow (red+green) |
| 2.9-3.3V | red |
| < 2.9V | black |
u/Nelson_uk also posted a great video testing the different colors as the light goes through the different voltages.
Hope this helps you out in using your fancy enthusiast flashlights. Gotta love them Aux LEDS!
Looking for even more control over your Anduril light? Anduril Builder can create custom firmware with only the features you choose.
Buy me a coffee?
Thank you for reading! If you found this useful, consider supporting my writing and indie app work with a small one-time donation through Buy Me a Coffee. Thanks!
